China Categories

Home Products Suppliers Selling leads

Home /

EN10219-2 Non - alloy / Fine Grain Steels Cold Formed Welded Structural Hollow

Send your message to this supplier

*From:

Your email address is incorrect!

To:TORICH INTERNATIONAL LIMITED

*Subject:

Your subject must be between 10-255 characters!

*Message:

Your message must be between 20-3,000 characters!

Yes!I would like your verified suppliers matching service!

Buy cheap EN10219-2 Non - alloy / Fine Grain Steels Cold Formed Welded Structural Hollow Sections from wholesalers

EN10219-2 Non - alloy / Fine Grain Steels Cold Formed Welded Structural Hollow Sections

Ask Latest Price

Brand Name:Torich

Model Number:EN10219-2

Certification:ISO 9001:2008 , TS16949

Price:USD600-1100per ton

Payment Terms:L/C, T/T

Supply Ability:6000MT/Month

Delivery Time:30~40days

Company Data

TORICH INTERNATIONAL LIMITED

Verified Supplier

Contact Person Richard SHEN

Business Type: Manufacturer Distributor/Wholesaler Importer Exporter Trading Company Seller

Officials: Suite 1004, Hongan Plaza, #258 Die Yuan Road, Yinzhou District, Ningbo City, China

Quality: Quality Certifitation Available

Visit Website

Product Details Company Profile

Product Details

EN10219-1 EN10219-2 Cold Formed Welded Structural Hollow Sections of Non-Alloy and Fine Grain Steels

Part 1: Technical delivery condition

Part 2: Tolerances, Dimensions and Sectional Properties

Structural hollow section manufacturing process:

Structural hollow sections are manufactured by electric welding or submerged arc welding without subsequent heat treatment. Hollow sections manufactured by a continuous process shall not incude the welds used to join the lengths of strip prior to forming the hollow section, except that for helically welded submerged arc-welded (SAW) hollow sections, such welds shall be permitted when tested in accordance with 9.4.3.0 EN10219-1, EN10291-2.

Delivery conditions:

The hollow sections are delivered cold formed without subsequent heat treatment except that weld seam maybe in the as welded or heat treated condition

NOTE: For SAW hollow sections above 508 mm outside diameter it may be necessary to perform a warm shaping operation, which does not affect the mechanical properties, in order to meet the out-of-roundness tolerance requirements.

Suitability for hot dip galvanization:

The products are suitbale for hot dip galvanization.

TABLE 1 Tolerances

Symbol	Unit	Definition
B	mm	Nominal length of side of square hollow section.Nominal length of the shorter side of a rectangular hollow section
C1/C2	mm	Length of corner region of a square or rectangular hollow section
Dmax/Dmin	mm	The maximum and minimum outside diameter of a circular hollow section measured in the same plane
H	mm	Nominal length of the longer side of a rectangular hollow section
M	Kg/m	Mass per unit length
T	mm	Nominal thickness
O	%	Out-of-roundness
T	mm	Nominal thickness
V	mm	Total measured twist

TABLE 2 Tolerances

Characteristic	Circular hollow sections	Square and rectangular hollow sections
Outside dimensions (D,B andH)	±1% with a minimum of ±0.5mm and a maximum of ±10mm	Side length (mm)	Tolerance
		H,B ＜100 100≤H,B≤200 H,B＞200	±1% with a minimum of ±0.5mm ±0.8% ±0.6%
Thickness(T)	For D≤406.4mm: T≤5mm ±10% T＞5mm ±0.50mm For D＞406.4mm: ±10% with a maximum of 2mm	T≤5mm ±10% T＞5mm ±0.50mm
Out-of-roundness(O)	2% for hollow sections having a diameter to thickness ratio not exceeding 100①	——
Concavity/convexity②	——	Max. 0.8% with a minimum of 0.5mm
Squareness of side	——	90° ±1°
External corner profile	——	See table 3
Twist(V)	——	2mm plus 0.5mm/m length
Straightness	0.20% of total length	0.15% of total length
Mass(M)	±6% on individual lengths

①Where the diameter to thickness ratio exceeds 100 the tolerance on out-of-roundness shall be agreed.

②The tolerance on convexity and concavity is independent of the tolerance on outside dimensions.

TABLE 3 External Corner Profile

Thickness

External Corner Profile

C1,C2,or R1

T≤6

6＜T≤10

10＜T

1.6T to 2.4T

2.0T to 3.0T

2.4T to 3.6T

The sides need not be tangential to the corner arcs.

TABLE 4 Tolerances on length①

Type of length	Range in mm	Tolerance
Random length	4000 to 16000 with a range of 2000 per order item	10% of sections supplied may be below the minimum for the ordered range but not less than 75% of the minimum of the range
Approximate length	≥4000	﹢50mm 0
Exact length	＜6000 ≥6000 to ≤10000 ＞10000	﹢5mm 0 ﹢15mm 0 ﹢5mm +1mm/m 0

①The purchaser shall indicate in the enquiry and order the type of length required and the length range or length required.

TABLE 5 Tolerances on height of internal and external weld bead for submerged arc welded hollow sections

Thickness(T)

Maximum weld bead height(mm)

≤14.2

＞14.2

3.5

4.8

Products forms:

CFCHS = cold formed circular hollow section

CFRHS = cold formed square or rectangular hollow section

Charecteristics:

- Tolerances on dimensions and shapes

- Elongation

- Tensile strength

- Yield strength

- Impact strength

- weldability (chemical composition)

Normative references:

EN287-1, Qualification test of welders - Fusion welding - Part 1: Steels

EN10020-1, Metallic materials - Tensile testing - Part 1: Method of test at ambient temperature

EN10020:2000, Definition and classification of grades of steel

EN10021:1983, General technical delivery requirements for steel and iron products

EN10027-1, Designation systems for steels - Part 1: Steel names

EN10027-2, Designation systems for steels - Part 2: Numericl systems

EN10045-1, Metallic materials - Charpy impact test - Part 1: Test method

EN10052:1993, Vocabulary of heat treatment terms for ferrous products

EN10168, Steel products - Inspection documents - List of information and description

EN10204, Metallic products - Types of inspection and description

EN10219-2:2006, Cold formed welded structural hollow sections of non-alloy and fine grains steels - Part 2: Tolerances, dimensions and sectional properties

EN10246-3, Non-destructive testing of steel tubes - Part 3: Automatic eddy current testing of seamless and welded ( except submerged arc welded ) steel tubes for the detection of imperfections.

EN10246-5, Non-destructive testing of steel tubes - Part 5: Automatic full peripheral magnetic transducer/flux leakage testing of seamless and welded ( except submerged arc welded) ferromagnetic steel tubes for the detection of longitudinal imperfections

EN10246-8, Non-destructive testing of steel tubes - Part 8: Automatic ultrasonic testing of the weld seam of electric welded steel tubes for the detection of longitudinal imperfections

EN10246-9, Non-destructive testing of steel tubes - Part 9: Automatic ultrasonic testing of the weld seam of submerged arc-welded steel tubes for the detection of longitudinal and/or transverse imperfections

EN10246-10, Non-destructive testing of steel tubes - Part 10: Radiographic testing of the weld seam of automatic fusion arc welded steel tubes for the detection of imperfections

EN1056, Non-destructive testing of steel tubes - Qualification and competence of level 1 and 2 non-destructive testing personnel

CR 10261, ECISS information Circular 11 - Iron and steel - Review of available methods of chemical analysis

EN10266:2003, Steel tubes, fittings and steel structural hollow sections - Symbols and definitions of terms for use in product standards

EN ISO 377, Steel and steel products - Location and preparation of seamless and test pieces for mechanical testing (ISO 377: 1997)

EN ISO 643, Steels - Micrographic determination of the apparent grain size ( ISO 643:2003)

EN ISO 2566-1, Steels - Conversion of elongation valves - Part 1: Carbon and low alloy steels ( ISO 2566-1:1984 )

EN ISO 9001:2000, Quality management systems - Requirements ( ISO9001:2000)

EN ISO 14284, Steel and iron - Sampling and preparation of samples for the determination of chemical composition( ISO 14284:1996)

EN ISO 15607, Specification and qualification of welding procedures for metallic materials - General rules ( ISO15607:2003)

EN ISO 15609-1, Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004)

EN ISO 15614-1, Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO 15614-1: 2004)

Company Profile

TORICH INTERNATIONAL LIMITED

Who We are ？

-------A professional steel pipes materials inventor, manufacturer and solution provider
Torich International Limited is a professional manufacturer and exporter of steel pipes materials. It is an international marketing and sales company specialized in steel tubes, which holds the factories of Seamless Steel Tubes with Carbon and Alloy Steel Grade, Welded Precision Steel Tubes，DOM Steel Tubes, Seamless & Welded Stainless Steel Tubes with Nickel and Alloy Steel Grade.
Our factory was established since 1997, with the name of Haiyan Sanxin Steel Pipe Co., Ltd. The factories’ technicians are of great engineering experience in steel pipe industry for more than 20 years, which are in great command of production technology for Cold Drawing and Cold Rolling. So we have strong technician team and manufacturing capability.

What products we do？

------- Invent and produce various Precision Steel Pipes

Our steel pipes cover the following ranges:
Seamless Precision Steel Pipes

Bearing Steel Tubes
Welded Precision Steel Pipes, with DOM production
Seamless Heat Exchanger Steel Pipe
Seamless Boiler Steel Pipes

Honed Tubes

Hydraulic Cylinder Steel Tubes

Hydraulic Telescopic Cylinder Tubes
Seamless Structural Steel Pipes
Seamless Mechanical Steel Pipes
Seamless Alloy Steel Tubes & Pipes
Seamless Stainless Steel tubes
Welded Stainless Steel Tubes
Seamless Stainless Steel Tubes & Pipes
Welded Stainless Steel Tubes & Pipes
Seamless Carbon Steel Tubes & Pipes
Nickel Alloy Steel Tubes & Pipes

What TORICH do:
1. Producing Steel Tubes
2. Selling both on Domestic and International Market
3. Precisely Targeting Customers’ Requirement- Sourcing the right factory for right products for Customers

Products Application:
Oil Cylinders
Air Cylinder,
Automotive Cylinder Liners
Boilers, Pressure Vessels
Shell & Heat Exchangers
Jack Lifting
Telescopic Systems
Pneumatic Cylinders
Agricultural Machineries

Size range is:
O.D. 4-350mm,
W.T. 0.5-30mm,
Length: according to customer’s requirement and agreement

Steel Grade:
Carbon Steel Grade:
ST35.8, ST37.0, ST44, ST52;
E155, E195, E215, E235, E275, E355;
195GH, P235GH, P265GH, P195TR1, P195TR2, P235TR1, P235TR2, P265TR1, P265TR2;
SAE1010, SAE1020, SAE1026, SAE1035, SAE1045;

Carbon steel tube: SA178, A179, A192, A210, SA213, SA214, etc.

Alloy Steel Grade:
T2, T5, T9, T11, T12, T17, T21, T22, T91,T92, 15Mo3,16Mo3, 13CrMo44;
SAE4130, SAE4140, 40Cr, 40Cr4, 10CrMo910, 12CrMo910, 11CrMo910,
25CrMo4, 35CrMo, 35CrMo4, 42CrMo4, 34CrMo4, 20MnV, 20MnV6,20CrMn;
Carbon steel tube: A179,A192,A210,DIN17175,etc.

Bearing Steel Grades:
GCr15 52100 suj2 suj3 100Cr6 SKF3S SKF3S 20CrNiMo 8620H 4118H;

Nickel Alloy Grade:
N02200/2201, N04400, N06600, N06601, N06625, N06852, N06219, N06690, N08800/8810/8811, N08825, N08028, N08535, N08904, N08925, N08926, N010276, N06022, etc.

Austenitic/Super Austenitic Stainless Steel Grade:
304/304L, 316/316L, 314, 321, 347H, 316Ti, 316LMod, 317L/N, 310S, 253MA, 330, 904L, S31254, XM-19, etc.

Ferrite/Martensite Stainless Steel Grade:
TP410, TP405, TP420, TP430, TP430Ti, TP403, TP409, TP444, TP439, TP446, etc.

Duplex/Super Duplex Stainless Steel Grade:
S31803, S32304, S31500, S32550, S32750, S32760, etc.

Corporate Culture:
We focus on Quality First, Quality Traceability, and Quality Stability!
We focus on Customer First, People First, and Quality-Oriented!

Success:
First factory started in 1997, in the name of Torich , now covers 50000 square meters of factory building, with more than 100employees, and over 45 million RBM assets.
In 2008, we started the company of Torich International Limited for international business and marketing.
Welcome partners from all over the world for long term cooperation!