Seamless Cold Drawn Steel Tube ASTM A334 For Low Temperature Service

ASME SA334 Seamless carbon steel and alloy steel tubes for low temperature service

Standard: ASTM A334 / ASME SA334

Steel grade: carbon steel, alloy steel

A 370 Test Methods and Definitions for Mechanical Testing of Steel Products

A 1016/A 1016M specification for general requirements for ferritic alloy steel tubes

Process: cold drawn seamless tube, welded tube (welding process with the addition of no filler metal in the welding operation)

The tubes cover minimum wall thickness.

Application: Tube for low temperature service

Dimensional range:

OD: 19.05-76.2mm

Any specific size is to be discussed before offer

The tube be 100% eddy current tested

Ultrasonic test is as option

Straightness ≤1mm/1000mm

Roughness: Ra ≤0.8

Mechanical properties

Test

• One tension test shall be made on a specimen for lots of not more than 50 tubes. Tension tests shall be made on specimens from two tubes for lots of more than 50 tubes.
• One flattening test shall be made on specimens from each end of one finished tube of each lot but not the one used for the flare or flange test.
• (Seamless tubes) One flare test shall be made on specimens from each end of one finished tube of each lot, but not the one used for the flattening test.
• (Welded tubes) One flange test shall be made on specimens from each end of one finished tube of each lot, but not the one used for the flattening test.
• For welded tubes, one reverse flattening test shall be made on a specimen from each 1500 ft [460 m] of finished tubing.
• Brinell or Rockwell hardness tests shall be made on specimens from two tubes from each lot.
• One notched-bar impact test, consisting of breaking three specimens, shall be made from each heat represented in a heat-treatment load on specimens taken from the finished tube. This test shall represent only tubes from the same heat, which have wall thicknesses not exceeding by more than 1 / 4 in. [6.3 mm] the wall thicknesses of the tube from which the test specimens are taken. If heat treatment is performed in continuous or batch-type furnaces controlled within a 50°F [30°C] range and equipped with recording pyrometers which yield complete heat-treatment records, then one test from each heat in a continuous run only shall be required instead of one test from each heat in each heat treatment load.
• (Welded tubes) On welded tube, additional impact tests of the same number as required in 12.7 shall be made to test the weld.
• Specimens showing defects while being machined or prior to testing may be discarded and replacements shall be considered as original specimens.

Tubes shall be delivered with square cut ends. The ends are free of excessive burrs.

The tubes are bundled in the waterproof plastic sheet and packed in the wooden cases

The case is most suitable for hanging by forklift.

EN10204-3.1 MTC shall be issued

EN10204-3.2 MTC is as option

Zhangjiagang Bonded Area Yaxin Precision Tube Co., Ltd.

Zhangjiagang Bonded Area Henglong Steel Tube Co., Ltd.

Long-term adherence strict quality control, uphold the "scientific management to create first-class products, promote the comprehensive development of continuous improvement, quality service to win customer satisfaction," the quality and continuously forge ahead, creating enterprise independent quality brand; uphold the integrity of the first with partners closely aligned. We sincerely hope that the friendly cooperation with the community, work together!

Zhangjiagang bonded zone Yaxin precision pipe making Co., Ltd., Zhangjiagang bonded zone Yaxin Auto Parts Technology Co., Ltd.

Zhangjiagang Free Trade Zone Yaxin Precision Steel Pipe Co.,Ltd.and Zhangjiagang Free Trade Zone Yaxin Auto Parts Technology Co.,Ltd.is a Sino-foreign joint venture company,established in 1999,located at Taiwan Road,Free Trade Zone,Zshangjiagang City,jiangsu Province.It is borderend by international mertropolis city-Shanghai to the east,the beautiful ancient city Suzhou to the south ,jiangyin Changjiang River Bridge to the west ,and international port-Zhangjiagang port to the north.The company covers the area of 200000㎡，of which constructiong area is 8500㎡ ,is has 15 million U.S.dollars (about 96 millon RMB)of registered capital,260million RMB of fixed assets,and its annual output is 30,000 tons of precision seamiess steel pipe ,precision welded pipe 50,000 tons.The company currently employs 500 people ,of which more than 60 have higher education ,more than twenty have senior titles or above .Our main products are cold rolled and cold drawn precision seamless steel pipes ,of which more steel pipes for automobile,Precision welded pipe for automobile.
The company has eamed great reputation among many well-known large business customers by our modern hardware facilities,independent designed special mould and unique production process;and by our standardized managenmen and strict management procedures;and by our business philosophy of"Honesty ,cooperation andcommon development".Our products are widely used by Shanghai Huizhong Sachs Shock Absoorber Co.,Sacths Automotive Components Systems (shanghai)Co.,Ltd.,ZF Chassis Technology-rich Mining Austria (Changchun)Co.,Ltd.,dongfeng ZF Shock Absonrher Co.,Ltd,Shanghai Huizhong Automotive Manufactuing Co.,Ltd.,FAW Tokico Shock Absorber Ltd.,Zhuzhou Nanfang Yamaha Shock Absorter Co.,Tenneco(Beijing)Co.,Ltd.
The company passed the ISO9001 quality system certification in 2008 ,obtained Special equipment manufacturing license(TS2710J44-2013)in 2009,Passed PED certified of TUV NORD in 2011,passed ISO14001 and OHSAS18001 management system certification of DNV in 2012,and was rated as a high-tech enterprise in 2013.Under the fierce market competition ,the company closely centers around the quality policy of"creating first-class products by scientific management,promoting overall development by contstant improvement and satisfying to the custorners"tokeep forging ahead ,further perfecing all kinds of equipments to dvelop the high quality brand for the company.
The company sincerely hopes that we can get friendly cooperation with all circles of the community.

Zhangjiagang Bonded Area Henglong Steel Tubes Co., Ltd.

Zhangjiagang Bonded Area Henglong Steel Tubes Co., Ltd. is a Sino-foreign joint ventrue company,estabilshed in 1999,located at Taiwan Road,Free Trade Zone,Zhangjiagang City,Jiangsu Province.It is bordered by internationgal metropolis city-Shanghai to the east,the beautiful ancient city Suzhou to the south ,Jiangyin Changjiang River Bridge to the west ,and internationgal port-Zhangjiagang port to the north .It embraces convenient land and water transportation,hospitable weather,god-blessed land rich in culture and talented people .Thereby the company enjoys a great geographical advantage.The company covers the area of 200000㎡，of which construction area is 8500㎡.It has 15 million U.S.dollars (about 96 million RMB)of registered capital,260million RMBof fixed assets,and its annual output is 145,000 tons of seamlell steel pipes.
The Company specializes in producing various types of steel,such as10、20、20G、35、45、16Mn、ST52、40Cr、37Mn5、D9MnD、40Mn2、15CrMoG、12Cr1MoVG、08Cr2ALMo、12CrMo1、T11、T12、T22、T23、T5、T9、SA179、SA192、SA106B、SA210C.Main prouducts are different types of seamless steel pipes ,for example ,steel pipes for structure,fou transmission fluid,for low and medium pressure boiler,for petrleum cracking ,for high pressure fertilizer equipment ,high pressure boiler.The outer diameter of the pipe is from 6 to 133mm,wall thickness is from 0.5 to 16mm.Our products are widely used in industry of machinery manufacturing ,ship engineering ,petrochemical,and pressrue boiler.
The company has eamed great reputaion among many well-known large business customers by our modern hardware facilities,independent designed sepcial mould and unique production process;and by our standardized management and strict management procedures;and by our business philosophy of"Honesty,cooperation and common development".
The company passed the ISO9001 quality system certification in 2008,obtained Special Equipment Manufacturing License(ts2710j44-2013)in 2009,passed PED certified of TUVNORDin2011,passed ISO14001and OHSAS18001management system certification of DNV ,AND was rated as a high-tech enterprise in2012.Unedr the fierce market competition,the company closely centers around the quality policy of"creating first-class products by scientific management ,promoting overall development by constant improvement and satisfying the customers"to keep forging ahead,fruther perfecting all kinds of equipment to develop the high quality brand for the company.The company sincerely hopes that we can get the friendly cooperation with all circles of the community.