
High Watt Density 230v L Type Cartridge Heating Element 1500w 304
Stainless Steel
Description:
) Cartridge heater is cylindrical electrical heating elements. Protected with a stainless steel sheath, their watt density can reach 25 W/cm2 and their operating temperature can go up to 800°C (1472°F)
2) Mostly cartridge heater is used for heating up solids such as injection presses heating plates or various tools, cartridge heater can also be used for heating up water of gases under certain conditions. Widely used for manufacturing plastic and rubber parts in the car industry or in the food processing industry, etc
3) cartridge heaters are also commonly found in the chemical, electronics, medical equipment, packing and nuclear industries
4) Various cartridge heater technologies are available. The choice
of technology will depend on technical specifications required and
the application. Unless you know exactly which product you are
looking for, we will recommend you the best solution for your
needs.
Specification:
Heating Wire: Ni80Cr20
Insulation: Magnesium Oxide (High purity)
Outside Diameter:6mm 6.5mm 8mm 10mm 12mm 12.5mm 13mm 15mm 17.5mm 20mm
Inserted Length:Customized.
Overall Length:Customized.
Sheath: Incoloy840&800,SUS304,SUS316,SUS321.
Watts:Customized.
Volts: 12Volts: 110v 200v 220v 230v 240v 380v 415v
Lead Length:Customized.
Lead Exit: straight / 90°
Material | SUS304,316L,321,Incoloy800,840,600 |
Diameter | 3mm~50mm |
Max operating temp | 870ºC(1600F) |
voltage | Voltage:12V-440V or as customer’s demand |
Heat intensity | Not exceeding 30Wcm2 (advisable) |
Insulation Material | High-purity Mgo |
Reisistance wire element | Ni-Cr or FeCr |
Lead Connection Option | Crimped or Swaged leads |
Lead and type of connection leads | 10" Fiberglass Standard(Wire options:silicone/PFA/high temperature fiberglass/SS braided). |
Cold areas | Depends on length and diameter 5-25mm |
Internal thermocouple | type J,K or E |
Thermocouple Location | Disc End, Sheath, Center of Heater; |
Application:
Shipping:
Wuhan Global Metal Engineering Co., Ltd
Wuhan Global Metal Engineering Co., Ltd (GME) specialize in the supply of heating elements and temperature sensors(thermocouples & RTDs) for a vast array of industries since year 1995.
Our main products include but not limited to Coil heater, Cartridge heater, Flexible Tubular heater, Cast-in Heater, Band heater, Thermocouple, RTD’s, Thermocouple extension wire, Thermocouple connection head , Mineral Insulated thermocouple cables , thermowell, etc.
After 20 years growth, we have more than 200 employees in the factory including 50 sophisticated technicians. Our products have been exported to many countries including North America, South America, Europe, Middle East ,South Asia, etc.
More details, you can also visit our website: https://www.gmemetal.com