China Categories

Home Products Suppliers Selling leads

Home /

RUT Union Tee Stainless Steel SS316L Plumbing Fitting Pneumatic Air Fitting High

All Categories

Black Annealed Iron Wire

Garden Wire Fence

Hexagonal Wire Netting

PVC Coated Wire Mesh

Welded Wire Fence

Wire Mesh Fence

PVC Coated Welded Wire Mesh

Stainless Steel Woven Wire Mesh

Welded Wire Mesh Fence

Welded Wire Mesh Panel

Send your message to this supplier

*From:

Your email address is incorrect!

To:Ningbo Sanmin Import And Export Co.,Ltd.

*Subject:

Your subject must be between 10-255 characters!

*Message:

Your message must be between 20-3,000 characters!

Yes!I would like your verified suppliers matching service!

RUT Union Tee Stainless Steel SS316L Plumbing Fitting Pneumatic Air Fitting High Quality Sanmin

Ask Latest Price

Brand Name:NBSANMINSE

Model Number:RUT

Certification:ISO9001

Price:Negotiation

Payment Terms:L/C, T/T, Western Union

Supply Ability:Negotiation

Delivery Time:Negotiation

Company Data

Ningbo Sanmin Import And Export Co.,Ltd.

Verified Supplier

Contact Person Ina Chen

Business Type: Manufacturer Importer Exporter Trading Company

Officials: 浙江省宁波市奉化区萧王庙街道科程小微企业园1幢303

Quality: Quality Certifitation Available

Visit Website

Product Details Company Profile

Product Details

RUT Union Tee Stainless Steel SS316L Plumbing Fitting Pneumatic Air Fitting High Quality Sanmin

Tube Fittings Description

The tube fitting is a mechanism used both to seal and to grip tubing . The mechanical advantage and geometry of this kind of fitting produces a leak – tight assembly .

To assemble , simply insert the tube into the complete assembly until the tube bottoms – out against the shoulder of the fitting body . The two ferrules are driven forward between the nut and fitting body using the mechanical force created by rotating the nut clockwise . The Back ferrule is driven against the tapered rear of the front ferrule is driven by force into the tapered mouth of the body .

The rear ferrule is swaged radially inwards on the tube while lifting the front ferrule out to form a full – faced seal on the tapered surface of the body .

The 1-1/4 Turn of the nut from the hand tight position assures consistent drive of the sealing members . This ensures an effective seal against high pressure as well as ultra high vacuum conditions .

Installation Instructions

Fittings are supplied assembled and finger tight . Disassembly before use can allow the entry of dirt or other particles

1 . Insert the tubing into the fitting

Check That the tube rests firmly on the fitting shoulder and that the nut is finger tight , At this point it is recommended that a scribe mark be drawn on the hex of the extending onto the fitting body . This mark will serve as an indicator for the starting point and proper pull – up .

2 Tighten the nut

1-1/4 Turns of the nut are required for 1/4” (6mm) and higher ( See Fig . A )

3/4 Turn of the nut is required for 3/16” (4mm) and lower ( See Fig.B )

Reassembly Instruction

Connections may be disconnected and remade repeatedly , without loss of leak tight seal .

1. Before disconnecting , Mark the position of the nut inrelation to the fitting body .

2. To reassemble , use a wrench to tighten nut to original position .

3. Tighten slightly with wrench until a slight rise in torque is felt .

Tube cutting

Two different methods can be used to cut tubes :

1 . Tube Cuter

2 . Hacksaw

Tube Cutter

To attain a leak free connection , the tubing must be cut squarely . A good quality tube cutter with the appropriate blade for the tubing material is recommended .

Do not try to reduce the time of cutting by taking deep cuts with each turn the cutter . This will work harden the tube .

The end of the tube must be deburred to avoid damage to the fitting and to ensure that the rube reaches the bottom of the fitting .

Hacksaw Cutting

In order to cut the tube with a hacksaw and get square ends , the tube must be cut with guide blocks

This method of cutting necessitates deburring of the tube ends.

Warning

Do not hold the tube in a vise in the place where it will be inserted into the fitting ( the vise will leave a mark on the tube that may cause leaks , and might cause ovality ).

Tube Handling

Scratches on the tube might cause leaks . it is , therefore , important to handle the tube carefully to reduce the risk of leaks .

Some Recautions to be taken

1.Tubes must not be dragged on the floor .

2.Tubes must not be dragged out of a tubing rack , especially in case of large OD tubes

Copper Tubing

If using copper tubing from a roll , hold the end of the tube and roll the roll outwards allowing the tubing to lie on a flat surface .

Inspection Tubing

Use : This is a “ No- Go ” Gauge and should be used as follows :

Make up to fitting according to the following instructions : 1/4 inch ( 6mm ) , 3/8 inch , 1/2 inch ( 12mm ) – make up 1-1/4 turns from finger tight . Check gap between nut and body , using the appropriate sized gauge . If the gauge slides easily into the gap , tighten the nut further until gauge can not enter the gap

High Safety

In applications where severe conditions and high pressure exist , we recommend the following installation procedures :

1. Check that the nut is finger tight

2. Insert the tube ( Up to the shoulder )

3. Rotate the nut with a wrench until the tube does not rotate freely .

4. Mark position of the nut .

5. Rotate the nut 1-1/4 turns .

This method ensures that even if the tube O.D. is at the minimum tolerance , the ferrules will be in contact with the tube for the full 1-1/4 rotation.

In order to assure maximum fitting reliability and performance , great care should be given when selecting the tubing for each application

Tube Selection

Four variables must be considered when ordering tube for use with fittings :

1. Material

2. Tube wall thickness

3. Tube surface finish

4. Tube hardness

Tubing should comply with standard ASTM A213 or ASTM A269 , be seamless , and fully annealed .

The tube must be red of scratches and suitable for bending and flaring .

FAQ

Q: How much is our minimum order quantity ?
A: Our minimun quantity is 1 Piece .

Q: What ' s your delivery date ?
A: It depends on the number of orders . Delivery date is 7 - 30 days .if small order,pls buy from our aliexpress shop, If you need emergency products , we can speed up the production of the first arrangement .

Q: Do your company have specialized technical personnel ?
A: Design as your requirements,and have QC for make 100% inspection

Q: What is the price of the product ?
A: Our prices are based on the size and type of material , if you can give me the information ,
then we can give you an estimated price is for reference only . We can do any size and any desgin .

Q: Could you offer the free samples ?
A: Yeah, we could offer the free samples based on special customer.pre-production sample,production sample.

Why choose us

1: Various style for each products and completely series pneumatic products .

2: Sample order & small quantity order is acceptable .
3: Customize according to your special request .
4: Provide free products information .
5: Large stock for fast shipping .

Fittings hose , Male female brass fitting , Male female fitting , Pipe fitting , Pipe fittings plastic , Plastic fitting , Pneumatic fitting , Push fittings , Quick connect fitting , Quick connecting , Quick coupling fittings , SS304 , Stainless steel fittings , Stainless steel pipe fittings , Tee tube fittings , Threaded stainless steel fittings , Tube connector , Tube fitting , Pipe Connection , Pipe Joint , Plasitc Quick , Couplers , Pneumatic parts , Threaded Union , Fitting pneumatic , Push in fitting , Push on fitting , Speed Controls , Stop fittings , Quick connecting tube fitting , Speed Controls , Check Valves , Hand Valves , Ball Valves , Hand Sliding fitting , Air control valve , Mini fitting , Push - In Fitting , Transition fitting , Push on fitting , Compression fitting , 316L Stainless steel fitting

Company Profile

Ningbo Sanmin Import And Export Co.,Ltd.

NINGBO SANMIN IMPORT & EXPORT CO.,LTD. was established in 2014.Our company is mainly engaged in instrumentation, pneumatic and hydraulic industry accessories and services, has more than 10 series of core products.Focusing on the production of automatic machinery to provide a variety of options, products have a wide range of applications.

Sanmin is an industrial and trade enterprise, has a strict quality control system from material selection, inspection workshop, product testing, production, inspection, packaging design to shipment.At present, the company's trade scale is expanding day by day, the customers spreads over more than 20 countries.

We are strictly abides by Chinese laws and regulations, and has won the trust of customers at home and abroad with good reputation. Welcome to telephone and send E-mail to communication, sincerely cooperate, and seek common development.

Supply Original FESTO,SMC,CKD,NORGEN,MARSH,BELLOFRAM,BELGAS,MUELLER,SBFEC.

NINGBO SANMIN IMPORT AND EXPORT CO.,LTD.

INA CHEN

Whatsapp/wechat: +86 15168536055

Desk phone :+86 0574 88915660

Skype: fhtrust

INA@PNEUHYDR.COM

Product Tags: