Finish 2B 316l Stainless Steel Coil Strip Good Corrosion /Heat Resistant

Finish 2B cold rolled 316L stainless steel strips thickness 0.3-3.0mm

316L Cold rolled stainless steel strips

Key Products Data

Introduction of 316L

Grade 316 is the standard molybdenum-bearing grade, second in importance to 304 amongst the austenitic stainless steels. The molybdenum gives 316 better overall corrosion resistant properties than Grade 304, particularly higher resistance to pitting and crevice corrosion in chloride environments.

Grade 316L, the low carbon version of 316 and is immune from sensitisation (grain boundary carbide precipitation). Thus it is extensively used in heavy gauge welded components (over about 6mm). There is commonly no appreciable price difference between 316 and 316L stainless steel.

The austenitic structure also gives these grades excellent toughness, even down to cryogenic temperatures.

Compared to chromium-nickel austenitic stainless steels, 316L stainless steel offers higher creep, stress to rupture and tensile strength at elevated temperatures.

Corrosion Resistance

316L is a kind of stainless steel containing molybdenum, due to molybdenum content, the overall steel performance is better than 310 and 304 stainless steel, on high temperature condition, when the concentration of sulfuric acid is less than 15% or higher than 85%, where is 316L stainless steel widely used, 316l stainless steel has good resistance to chloride corrosion, so it’s commonly used in marine environment

Heat Resistance

Good oxidation resistance in intermittent service to 1600°C and in continuous service to 700°C. Continuous use of 316L in the 800-1575°C range is not recommended if subsequent aqueous corrosion resistance is important. Grade 316L is more resistant to carbide precipitation and can be used in the above temperature range.

Heat Treatment

Solution Treatment (Annealing) - Heat to 1010-1150°C and cool rapidly. 316L cannot be hardened by thermal treatment.

Weldability

316L stainless steel has good welding performance. The welding can be operated in all standard welding method welding. According to the purpose, the welding may be carried out respectively by 316cb, 316L or 309cb stainless steel filler rod or welding rod. In order to obtain the best corrosion resistance, 316 stainless steel is necessary to annealing after welding. In case of use of 316L stainless steel , the annealing annealing after welding is not required.

Chemical Composition&Mechanical Properties

C≤0.03,Si≤1.0,Mn≤2.00,P≤0.045,S≤0.030,Ni:10.0-14.0,Cr:16.0-18.0,Mo:2.0-3.0

Tensile Strength (N/mm²) :480 MIN

Yield Strength (N/mm²):175 MIN

Elongation (%) :40 MIN

Density: 7.98g/cm3,

Hardness: HRB<90 HV<200 HBS<187

About finish 2B

Main Application for 2B

OUR MAIN PRODUCT RANGE

We are able to supply a wide variety of goods, from raw materials such as hot rolled and cold rolled coils/plates/sheets to downstream processing goods like stainless steel pipes,angle/flat/round bars,wire rods, as well as some auto exhaust pipes etc.

About Us

JUYE metal was established in 2017 and is located in Ningbo City，which is one of the China’s largest international port cities, with convenient transportation facilities and mature commercial service network for steel products.

We are a fast-growing company, nearly all the staffs have over 10 years of professional experience in stainless steel industry. We specialize in the manufacturing, processing, distributing, warehousing and logistics of stainless steel products. We cover all aspects of the services, from the source of the stainless steel industry chain to the final products recycling and reuse.

We are the main partner of big mills in China and abroad, such as Tsingshan, Baosteel, Tisco, Jisco, Yongjin, Hongwang, Yusco, etc...With our years of rich experience and knowledge accumulation in the field of stainless steel, as well as professional processing capabilities and a strong distribution platform, our products are exported to all over the world, and we have cultivated a good user base, which in turn has grown our team.

Our own warehouse in Ningbo bonded area stores 5,000~8,000 tons of coils per month, mainly serving overseas customers for processing. We carry out a series of further processing such as cutting, slitting, trimming, polishing, and punching in our own factory.

We are implementing a strict quality control system to ensure that all products meet quality requirements of customers. We have attained many certificates such as ISO 9001,CE,PED,SGS ,etc.. All the products will be strictly inspected before shipment.

Thanks to the support and trust of our partners, our sales volume continues to increase and our business territory continues to expand.