
Rapid Temperature Change Environmental Cycling Test Chamber 100mm
Cable Port
OEM are welcome , more detail information ,pls kindly contact
:anna@komegtech.com Wechat&Whatsapp :+86-18098281986
Applications :
Applicable to environmental adaptability and reliability test in
such industrial units as electronics, electrical
appliance, battery, plastics, food, paper product, vehicle, metal,
chemistry, building material, research
institution, inspection and quarantine bureau, university etc..
Ⅳ.Main Technical parameters | |
1. Chamber (Water cooled ,ambient temperature +25℃,no load ) | |
1.1 Workspace volume | W1000 × D800 × H 1000 mm |
1.2 Exterior size | W 1600 × H 2330 × D 3195 mm (Approx ) |
2. Temperature | |
2.1 Temperature range | -70℃~+150℃ |
2.2 Temp Deviation | ≦±2.0℃ |
2.3 Temp Stability | ±0.5°C |
2.4 Temp Uniformity | ≤±2.0°C |
2.5THeating up time | From -40⁰C to up to +85⁰C, linear 20⁰C/min (Dead load 30Kg iron) |
2.6 Cooling time | From +85⁰C to up to -40⁰C, linear 20⁰C/min (Dead load 30Kg) iron
without heating |
2.7 Temp Control ramp | From 20°C to 85°C (20°C/min) +85°C dwell for 23 minutes, |
*Temperature performance test is based on the relevant provisions
of IEC60068 -3 standard | |
Ⅴ,Chamber Structure | |
Overall structure and chamber was composed of three parts as below. | |
1.Insulation box | wall material: high-quality carbon steel with static color spray |
2.Door | Single door ,left open ,Heating wire was installed at the door
frames to |
3Observation window | With observation window(specific size according to design)
multi-hollow |
4.Cable port | Φ100 mm located on right sides with rubber stopper and plastic cover |
5.Lighting device | LED One type located on observation window |
6. Heater | High quality nickel-chromium wire electric heater, non contact
control (SSR) |
7.Condensate drain outlet | With workroom condensate and condensate drain |
8.Shelf for samples | stainless steel sample holder 2pcs,Adjustable, load capacity 30kg/
layer |
9.Mobile Casters | Mobile Casters *4 with foot cups |
10.Electric control box | Total power circuit breaker, over-temperature protection. |
Ⅵ,Freezing system | |
1. Compressor | Bock /Bizer Semi-Hermetic Compressor from Germany |
2. Refrigerant | Environmental-friendly refrigerant: R404A ,R23 |
3. Condenser | Shell and Tube condenser(Water -cooled) |
4. Evaporator | Fin-type multi-stage automatic load capacity adjustment, No frost
in long- |
5. Other accessories | Use internationally-known brand, such as high precise expansion
valve, |
6.Refrigerant flow control | Adjust energy consumption output and control automatically to the |
7.Refrigerant flow control | Adjust energy consumption output and control automatically to the |
Ⅷ. Electrical control system | |
1. Control cabinet | A. Emergency stop switch |
3. Protection System | A. Heater protection switch if no water |
5. Alarm | Equipment stops running and sends audible alarm when the above protection appears, meanwhile, fault, causes and solutions will be displayed on the screen. |
Packing Details:
We use PP Film wrapping the test chamber to protect the test
chamber from moisture or being scratched first, then use strong
plywood case for easyload and transport, and to keep the chambers
from potential crash or impact.
Photos Show
KOMEG Technology Ind Co., Limited
ABOUT KOMEG
Founded in 1990, dedicating in environmental test equipment for over 30 years, KOMEG Technology lnd Co., Limited, is famous for its KOMEG star brand of environmental test equipment in China and overseas.
KOMEG specialize in climatic test chambers, temperature humidity test chambers, thermal shock test chambers, walk-in chambers, aging test chambers and burn-in room, drying ovens, Altitude test chamber, salt spray testers, and medical laboratory equipment, etc. During the past decades, KOMEG cooperated with and served many enterprises like Gree, Konka, Samsung, LG, Hiconiecs, BYD, Magna International, TOYOTA, Amicell, Stankomet, Premier, Hitek, UL, SGS, Intertek, etc.
KOMEG factory is located in Dongguan Songshan Lake, National Hi-Tech Industrial Development Zone, covering an area of 5, 000 sqm, with over 100 skilled employees including 30+ R&D engineers. (40 minutes from Shenzhen Baoan Airport by car; and 90 minutes from Guangzhou Baiyun Airport by car)
KOMEG also has branch office in Shenzhen.
Our Philosophy
Born for quality, test for future.
Our Aim
Better idea, better design and better quality.
KOMEG keep striving for continuous innovation, releasing no less than 5 new designs each year.
Our strong R&D team and skilled engineers and workers are the key factors for our success.
No matter standard models or customized project, we have rich experience to realize customers' requirements, so that our customers worldwide can benefit more from us when working with Komeg.
Ensure to meet your specific test standards, all key components and parts are imported famous brand from all over the world.
Thats why Desay( Apples' battery supplier, KONICA MINOLTA, SENKO,
Midea, TCL and Huawei are also among our long-term clients. With
KOMEG top brand strength, renowned reputation domestic and
overseas, our products are widely exported to Europe, America,
Southeast Asia, Africa, Oceania, etc. countries like
Russia, Germany, Korea, Singapore, Brazil, etc.
Distributors welcomed, Inquire today to get your order started.