
Color Powder Coatings for Lamps and lantern both Indoors and Outdoors
Product Description
This product is synthesized by epoxy and polyester resin, with special properties
of the two materials, with advantages of excellent decorative effect, mechanical
properties and high corrosion resistance. It is widely used in metal lanterns
decoration as following:
•lantern decoration: ceiling lamp, table lamp, fluorescent light, energy-saving lamp,
flood light, explosion proof light, signal lamp, indoor light, outdoor light, wall light,
ground light, pendant light, down light, spot light, yard lamp, road light;
•we offer powder coatings with different colors, gloss and textures.
Physical properties | Gravity | 1.4-1.7,up to color and gloss | ||
Grit size | 100% smaller than 100μm, special requirement should be informed | |||
Mobility | 120-140 | |||
Properties of Coating layer | Item | criteria | result | |
Gloss 60° | GB/T9754-88 | 1° to 95°+ | ||
Impact test | ISO6272 | GB/T1723-1993 | 50cm/kg | |
Cupping test | ISO1520 | GB/T9753-1988 | 8mm | |
Adhesion | ISO2409 | GB/T 9286-1998 | Grade 0 | |
Bending test | ISO1519 | GB/T 6742-1986 | 2mm | |
Pencil hardness | ASTMD3363 | GB/T 6739-1996 | 1-2H | |
Salt-fog test | ISO7253 | GB/T 1771-1991 | >500h | |
Anti-humidity | ISO6270 | GB/T 1740-1979 | >1000h | |
Heat resistance | 110℃/24h(white) | Excellent gloss retention, E≤0.3-0.5 |
Attention:
1. Above parameters are gained from oil-free, rust removal cold rolling steel board
of thickness of 0.8mm, under experimental circumstances, with coating layer thickness of 70μm;
2. The property data may drop down a little upon gloss reduction.
Application conditions: | Consolidation conditions | Standard | 185℃(work piece temperature) 15min | |
Low temperature | 160℃(work piece temperature) 15min | |||
Fast | 200℃(work piece temperature) 8min | |||
Pre-treating | Pre-treating methods differs from different substrates( phosphating process, sand blasting, shot treatment) | |||
Spraying | Corona electrostatic spraying ; frictional electrostatic spraying ; static electricity spraying fluidized bed (user must propose requirement); Fluidized bed hot – dip coating (user must propose requirement ); for other spraying method (user must propose requirement ahead) | |||
Theoretical coverage | 8-10m2/kg, coating layer thickness60um, up to types and colors | |||
Application confine | Outdoor and some for indoor | |||
Packaging and transportation | 20Kg/Carton, with polyethylene bag, Non-dangerous articles, transportation friendly. Avoiding straight sunlight, humidity, heat, and contact with chemical substances; | |||
Storing | Stored indoors at 40℃, ventilated, dry, clean warehouse, avoiding fire source, heat radiators, straight sunlight, opening to the air. Warranty period: 6 months. To be used after checking if expired. Unfinished bags should be sealed after opening. | |||
Hygiene and security | Container or bags should be sealed after working. Keep away from fire source. Avoiding intake of powder. Catering and smoking are forbidden in relevant warehouse. Labor should wear anti-static shoes, keep grounding. |
We do not recommend use of bright color series such as yellow, orange, red, or metallic color series.
For details, please contact us. In order to protect metal parts, pre-treating must be done in good
quality before coating. For details, please contact supplier of pre-treating chemicals.
HONG KONG SUNRISE MATERIALS CO., LIMITED
Hong Kong Sunrise Group is a customer-oriented, innovative,
value-driven company, which manufactures, processes and distributes
steel products and service worldwide. Over the years, the group has
built up serval iron and steel production and processing bases in
East and North China with annual capacity over 1 millions tons and
a well established sales network around the world. The group
currently empoly staff over 1000 people and the total assets reach
US dollars 50 millions.
Our main products includes below several different types:
Our factory located in beautiful coastal city of Shanghai, Tianjin
with convenient transportation, which covers a large-scale
manufacturing bases and more than two hundred of professional
techinicians. Our products include cold rolled steel, galvanized
steel, galvalume steel and pre-painted steel, etc.
We also have our two accessories building materials factories, one
lies in Guangzhou, Yinda powder coating factory and another is
inuslation materials lies in Tianjin, which supply glass wool and
rock wool insulation materials.
Below is the production line information:
1. Cold Rolled Production Lines---- 4 Lines
2. Galvanized Production Lines---- 4 Lines
3. Galvalume Production Lines ---- 2 Lines
4. Pre-painted Production Lines ---- 4 Lines
Our products sell well in domestic andmore than 70 countries and
regions throughout the world, mainly in South East Asia, South
America, The Middle East, Turkey and Africa, Europe and so on.
We provide clients with the excellent and intergtative service of
development and design, manufacturing and installation, testing and
trainning, and insist on the business principle of "quality
assured" and "reliable reputation".
Sincerely wish to strengthen business relations with friend both at
home and abroad, creative beautiful future!