BE ASME Super Duplex Stainless Steel Tube B36.19/10 ASTM A 790 UNS S32760

BE ASME Super Duplex Stainless Steel Tube B36.19/10 ASTM A 790 UNS S32760

S32760, also called F55 or 1.4501, is a high-alloy super duplex stainless steel, featuring strong strength

and corrosion resistance, mainly used in a variety of strong corrosion environments such as chemical

processing, petrochemical and submarine equipment.

Features of Inox F55

S32760 duplex steel also features strong resistance to chloride corrosion, high thermal conductivity

and low coefficient of thermal expansion. Higher chromium, molybdenum and nitrogen content make

it highly resistant to pitting, crevice corrosion and other corrosions. The excellent overall performance

of S32760 duplex steel is superior to that of general dual phase steel, such as 2205, S31803 and so on.

S32760 duplex steel is resistant to various inorganic acids and organic acids. The copper added makes

it resistant to non-oxidative acid corrosion. S32760 is also resistant to strong alkali corrosion, but it is not

suitable to work at temperatures above 300 ° C for a long time, because a long-term exposure to such

high temperature will lead to reduced toughness of the material.

S32760 stainless steel was used as cast steel in the early 1980s to make up the insufficient corrosion

resistance of the second-generation duplex stainless steel 00Cr22Ni5Mo2N (2205). In the late 1980s,

it came to be used as the deformable material for pipeline systems. Subsequently, this super duplex

was introduced as an important corrosion-resistant material into oil and gas development, seawater

environment, flue gas desulfurization (FGD), desalination, and chemical applications.

S32760 stainless steel also contains a small amount of tungsten and copper in addition to high chromium,

molybdenum and nitrogen. In early times, tungsten and copper were added to improve the casting

properties of this alloy. Later, it was found that tungsten and copper could enhance the corrosion

resistance of the steel in certain acids and its ability to passivate in seawater.

Just like other super duplex stainless steels, S32760 stainless steel microstructure presents a

two-phase structure with α/γ close to 1 under solid solution conditions. However, undergoing

from high temperature to room temperature like incorrect thermal processing, heat treatment and

welding process, during which cooling processes, there will be intermetallic phases and nitrides

on the substrate of S32760 stainless steel. When exposed to temperature at around 900 °C for more

than 100 seconds, σ, χ, Cr2N, etc. will precipitate on the substrate; at about 475 °C for more than

800 seconds, the α phase will precipitate. In order to avoid the precipitation of the intermetallic

phase and the Cr2N phase, it must have a sufficient cooling rate during the cooling process.

Plus, this super duplex stainless steel does not adapt to heat treatment and cooling to produce σ phase.

UNS S32760

Chemical Composition

S32760 Applications

• 1) Neutral chloride environment;
• 2) Oil refining industry;
• 3) Pipeline used for chemical industry;
• 4) Oil and gas industry;
• 5) Pulp and paper industry;
• 6) Fertilizer industry, urea industry, phosphate fertilizer industry;
• 7) Seawater environment, energy and environmental protection industry;
• 8) Light industry and food industry, food and pharmaceutical industry equipment;
• 9) High strength structural parts;
• 10) Hood desulfurization, infiltration desalination equipment, sulfuric acid plant;
• 11) Submarine pipelines, marine engineering fasteners, etc.;
• 12) Others.

Jiangsu Mittel Steel Industrial Limited is  located in Wuxi City,  a beautiful city near Shanghai.  Wuxi is close to  Shanghai (BAO STEEL) ,Zhangjiagang (ZPSS),Ningbo (BAO XIN),KUN SHAN (DKSS), enjoy excellent geographic location and convenient water, land and air transportation. , Wuxi become the biggest  stainless steel sheet ,plate and coil  supply Centers in China. Jiangsu Mittel Steel Industrial Limited was established in 1998 years. as one of the largest stockists and manufacturers of industrial grade Stainless Steel products and derivatives in Wuxi ,We keep a stock of 50000 tons every month, so we can delivery goods in fast time.

Our company supplies cold/hot-rolled stainless steel sheets,stainless steel coils and stainless steel Plate to many steel factories from athome and abroad, including Shanxi Taigang Iron& Steel CO, . Ltd (TISCO)Zhangjiagang Pohang (ZPSS), Shanghai BAO STEEL, Ningbo Baoxin and steel factories in Taiwan area, Mainland Chinese and foreign countries and regions. 

Our long-term business lines are 201.202.304(1.4301).304L.316.316L(1.4404).430.409L, 309S ,310S(1.4845).317L.904L.S31803(1.4462).S32750.S32760, Finish: 2B, BA, NO. 1 NO. 4, HL, 8K and so on...Meanwhile, our company is also engaged in the long-term supply of homemade & imported medium and thick plates, galvanized and carbon steel products. 

Adhering to the principle of "quality first and customer foremost",our company will offer long-term service to nationwide manufacturers of household appliances, elevators, tableware, ornaments, tanks and machines. We can offer precise frosted wiredrawing, 8K mirror finishing and skim board oil-abrasion of various specifications at any time. The precisely-processed products will meet your requirements for high quality. Our company is a modern enterprise integrating distribution and storage. 

If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future.