High Pressure High Temperature Large Steam Sterilization Autoclave For Microbiology Lab

Specification

The Autoclave Sterilizer Machine shall have minimum of the following alarms and safety features, but not limited to:
 High Temperature over shoot alarm
 Too long time to create vacuum
 Vacuum pump trip alarm
 Utility failure alarm

 All the motors shall be provided with overload relay.

 During the sterilization period if the chamber temperature falls below the set temperature,

the sterile hold period counting will stop. The counter shall restart again once the set

temperature is reached.

Description

1.cGMP compliance

This autoclave sterilizer machine is horizontal with sliding horizontal opening double door,

horizontal chamber type (rectangular chamber with smooth round corners and jacket)

with fully automated operating system.The entire construction including all components

shall be fully compliant with cGMP requirements.

2.Contamination seal

A stainless steel flush mounting shall be fitted between the sterilization chambers and the

sterile area wall to avoid any cross flow of air between the sterile and non-sterile side.

3. Vacuum pump
The sterilizer equipped with a water-ring type vacuum pump.

4. Steam condenser
Vendor shall provide a steam condenser made of AISI 304 fitted in the exhaust/vacuum line to

condense the steam before entering the vacuum pump.

5.Validation port
The chamber equipped with two validation ports with dummy & adaptor for insertion of

multiple temperature sensors (minimum upto 16 temperature sensors).
The equipment has a provision on the steam feeding pipe which allows the installation of

an appropriate device (Client’s scope) for the execution of steam quality tests (non condensable

gas test, superheated gas test and dryness test).

6.Air Intake Filter
The sterilizer has a sterilizing grade hydrophobic air intake filter of 0.22micron pore size for

vacuum break. The air intake filter shall be placed on the sterile side of the sterilizer. Option shall

be provided to sterilize the filter and perform integrity check. Relevant RTD for process control

and monitoring inside the filter housing shall be provided.

Applications

The Autoclave sterilizer Machine shall be suitable for handling the following materials:
 Glassware
 Metal Trays
 Containers and metal materials
 Machine and accessories used in production
 Basic biopharmaceutical products which can withstand heat treatment at high temperatures.
 Clean room Garments
 Lab Fermentors/Bio-Reactors
 Silicon braided tubes etc.

Competitive Advantage

 Minimum sterilization requirements selectable as minimum F0 target.
 Sterilization control selectable on time basis (with or without F(T,Z) calculation) or F(T,Z) basis.

Brochure load down from here

Medpharm medical large steam autoclave brochure.pdf

MEDPHARM Company team is committed to providing quality sterilization products, service, parts and

maintenance training at significant savings. From customized parts packages to turnkey equipment

 acquisition and installation, our innovative sterilization solutions are designed to meet our customers' needs.

We understand that untimely breakdowns are costly and can be detrimental to your everyday operations.

Our  service team is compromised of expert technicians that respond quickly to all of your service needs.

We offer on-site service support including inservices, installation and deinstallation of your equipment. From

breakdown  repairs to comprehensive maintenance programs, we have an innovative service solution for you.

We will service on-Site Repairs.Our staff is equipped with the resources required to provide you with

on-site,   on-time repairs in compliance with manufacturer specifications. We also provide installation,

deinstallation, and inservices on most makes and models of sterilization equipment. Near or far we can

 provide you with service support that you need.

Our reconditioning background has taught us of the importance of having quality parts on hand at all times.  We have a large inventory of individual repair parts, as well as preventive maintenance kits, and consumables  in stock and ready to ship today.

With our expert technical support staff, it is not always necessary to have part numbers to place an order.

 We will help you identify the quality parts that you need.